Graser's Dental Ceramics

04/28/2026

Good news is always appreciated!
A couple of post op photos we recieved from recent cases. Top photo #8 layered eMax. Bottom photo #7 layered zirconia. Both layered in eMax ceram.

04/10/2025

I haven't had time to post anything in a long time , but I couldn't let this one pass. Atlantis Bridgebase with Ivoclar Prime Zr. Tissue layered with EMax Ceram.

10/06/2023

09/18/2023

Really enjoyed the hands on lecture with Jurgen Seger at Ivoclar last week. Already applying much of what I learned. As always , I appreciate the people attending and running the classes.

12/14/2022

Something we don't do everyday. Zirconia bridge on implants using telescopic copings to correct the path of insertion. The implants were placed independently of each other some time ago. Teeth 8&9 were then lost. Implants 7&10 were then utilized for the bridge.

11/21/2022

Back up and running after 70+ inches of snow in a day. Many thanks to Les Draudt & sons for getting our lot plowed out!

11/18/2022

Graser’s Dental Ceramics is closed for the day Friday 11/18 due to the snow and travel restrictions. We will re- open on Monday 11/21.

04/04/2022

FYI I will be out of the office 4/7-4/8 for continuing Ed. at Ivoclar in Amherst NY. Thanks!
Tom

Guided by Nature, Powered by IPS e.max Ceram & IPS e.max Prime

12/20/2021

Microlayered Zircad Prime on Straumann Multiunit abutments. We've been really busy here so I haven't been able to photograph much of our work lately.

09/14/2021

NEW! IPS Prime Esthetic zirconia from Ivoclar Vivadent is a premium quality ,multilayer zirconia in the 850 Mpa range. It has been designed for monolithic restorations with maximum esthetics up to 3 unit bridges in the posterior.
We are fortunate to be able to test this material before general release. The color and translucence of this material are much improved over some of the zirconia we have had in the past. The case in these photos virtually matched the target shade tab right out of the sintering furnace. The minimal characterization that I did was not really necessary . I'm looking forward to the release of this zirconia with a full complement shades.
Fully digital case from a Medit scan. Designed the model, Biohorizon custom abutments and ZR screw retained crowns all in one shot. Awesome.